U601 Oil indicator

U601 Oil indicator

U601 series Oil Viewing Device is designed to watch whether the pipes of the fueling machine is full of liquid or not.

Materials:

Body: Brass

Viewing glass: Toughened glass

seals: Buna-N

Surface: electronic Chromium plated

Bearing: Iron ball

Features :

U601 Oil View Device provides a 360°swivel action which can reduce the physical strain

100% Factory Tested.

Package:

Net Weight Cross Weight Dimension

36.5kg/case of 50 40kg/case of 50 27.5x27x33 cm / case of 50

wing measuring requirements: Instrument of measurement should have a certain tension and not easily be deformed so as to affect the inner cubage volume. Foam and vapor that dissolved in fuel measured are able to be discharged completely when pouring into instrument of measurement. Liquid measured should be discharged after measurement, only a bit being left in container. Valve of instrument of measurement should have reliable sealability without leakage phenomenon as being full of oil. Indicating pipe on measurer should be made of glass without defect on inner diameter so as to hinder observation. Connection between measuring neck and scale should be fixed in order to keep stably relative position. The line on indicating glass should be legible and clear, width being no more than 0.25mm. The inner of measuring neck is depended upon measurer’s accuracy. As for Class II metal standard measurer, the ratio of corresponding liquid volume of per millimeter to measurable volume of measurer is no more than 5×10�. Discharge time of measurer relies on the diameter of bottom valve. It is leaned from experiment that the longer time of unload the less residual liquid left, better promoting measurement accuracy, and vice versa. Thereby, in order to control the tolerance occurred by discharge velocity and time and residual volume during approval progress, discharge condition and pouring-out time is regulated generally that opening fully bottom valve start to count two minutes from liquid dropping, then close bottom valve; or fully open bottom valve and close it after 3 minutes. Indicated value generally read out as showed at the bottom of curve in indicating glass. fuel dispenser Apart from standard measurer applied in fuel dispenser inspection and approval, there is thermometer or temperature sensor, measured range �0�to �0� minimum value 0.2� which used to measur fuel dispenser e temperatures of liquid that passed over nozzle vent and in standard measurer. One of purpose to measure temperature is to make modification of fuel dispenser

EVENT DESCRIPTION　　 When the CD has been configured with the essential data to operate and no major errors are　　 Operative　　 detected the CD goes to the CLOSED state automatically.　　 Action: The CD sends the unsolicited data Status.　　 SetUp When the SetUp command is received the CD moves into the SET-UP state.　　 Action: The CD sends the unsolicited data Status.　　 MAJOR ERROR If a major error event occurs the CD stays in the INOPERATIVE state.　　 Action: The CD sends the unsolicited data Status and Error_Type_Message.　　 MINOR ERROR If a minor error event occurs the CD stays in the INOPERATIVE state.　　 Action: The CD sends the unsolicited data Error_Type_Message.　　 In case a command is sent which is not included in this event description the command will　　 (OTHER)　　 be rejected and the CD stays in the same state.　　 Action: The CD sends a NAK - Command refused in this state .　　2.2.2 State CLOSED 2　　 STATE DESCRIPTION　　 In this state the CD is completely configured and no major error has been detected.　　 CLOSED　　 The CD is waiting to be opened or the power to be switched off. This may be used to　　 temporarily shut down one or more CD s when busin fuel dispenser ess is slack.　　 EVENT DESCRIPTION　　 SetUp When the SetUp command is received the CD moves into the SET-UP state.　　 fuel dispenser Action: The CD sends the unsolicited data Status.　　 Open fuel dispenser

an s president seeks to bolster his strange interpretation of history Reuters A LONG-ADVERTISED international conference held this week in Iran s capital to discuss the Holocaust made little pretence at neutrality or objectivity. Most speakers challenged the accepted facts of the Holocaust or accused Jews of skewing the facts to help justify the establishment of the Jewish state. Afterwards, participants were invited to meet President Mahmoud Ahmadinejad, who had called for the event following his assertion last year that the Holocaust was a myth. A group of Orthodox rabbis from a fringe group, Jews Against Zionism, was feted by the authorities and placed in the front row of the hall in an effort to show that the event was not anti-Semitic. Officials smiled when one of the group vilified Israel and praised Mr Ahmadinejad. The list of speakers included a former Ku Klux Klansman, David Duke, and well-known Holocaust deniers, such as Fredrick Töben, an Australian of German origin, and Robert Faurisson, a Frenchman. An exhibition in the same building was reached by a stairwell decorated with posters comparing Holocaust “myth�with “truth� The works of Holocaust-denier hugs a helpful rabbi Holocaust-deniers such as David Irving, who is in prison in Austria, were displayed in glass cabinets. Iran s foreign minister, Manuchehr Mottaki, opened the Holocaust conference by favourably comparing his country s spirit of “s fuel dispenser cientific and scholarly�freedom with the West s. On the second day, President Ahmadinejad declared that “Israel is about to crash, the Soviet Union disappeared, and this will also be the fate o fuel dispenser f the Zionist regime...Humanity will be free.� Government newspapers widely reported the conference under front-page headlines alongside ph fuel dispenser