S-GA FUEL DISPENSER

S-GA FUEL DISPENSER

Pump Type :Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition: -40~~+55degree

Control Type : Solenold Vale Control Type

Preset : Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume: 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight : 285kg.

Dimension(L×W×H) :1160*560*2215(mm)

Dimension(L×W×H)Of Qty of Container: 40ft: 27

ents on metrological management. The chapter briefly introduces fuel dispenser’s metrological management and technical requirements, appraisal related and attentions. Article I Metrolo fuel dispenser gical management and technical requirements In accordance with The Law on Metrology of fuel dispenser’s legal management mainly includes following aspects: Model approval, initial approval, subsequent appraisal and inspection in operation. Model approval refers to an entire test, examination and assessment as to new model’s entire performance. Initial approval refers to assess whether or not the fuel dispenser made by manufacturer in accordance with the model having been ratification through a series of testing, as well as metrological performance with relative metrological rules and regulations. Initial approval really has two phases �- approval combined with factory test, and testing appraisal after installation. Subsequent appraisal is conducted after long time since initial appraisal, from which considerable appraisal period is set down according to related requirements. Periodical appraisal is also regarded as the continued subsequent appraisal. Fuel dispenser’s measuring performance within appraisal period needs to be examined, so filling station should deploy self-check standard instrument (no less than 20L) to examine and inspect. Apart from applied to fuel dispenser approval, JJG443-98 also adapt sample testing and pattern evaluation. Although there are two items of accuracy and flow distance ratio conducted in initial approval and subsequent evaluation, there are other technical parameters different from approval as for fuel dispenser made after passing pattern evaluation, including minimum calculated volume and minimum cubic variable. Several items reference to the pattern evaluation and sampling testing of mechanical hydra fuel dispenser ulic section of fuel dispenser as followed: Accuracy testing The testing’s purpose is to define the flow curve and verify the tolerance scope in which the allowed maximum tol fuel dispenser

r message with the respective　　 Data_Id s length set to 0.　　 42 Bcd 4 R(6-9) O　 fuel dispenser 　 Current_Price_Set_Nb　　 (2AH) Indicates the current Price_Set_Nb in use by this (0-9999)　　 dispenser.　　 PCD Comment:　　 As this is an optional data field the PCD can NAK any　　 write requests to this Data_Id with a Data_ACK code of 4　　 (Data does not exist in this device) or reply to any read　　 request with an answer message with the respective　　 Data_Id s length set to 0.　　March 2006 IFSF - STANDARD FORECOURT PROTOCOL FP31_2.23　　 DISPENSER APPLICATION　　 Page: 105　　 FUELLING POINT DATABASE　　 DB_Ad = FP_ID (21H-24H)　　 Data Field Type ReadWrite MO　　 Data Element Name　　 Description　　 _Id (Value) in State　　 CONFIGURATION　　 43 Bin8 R(1-9) O　　 Multi_Nozzle_Type　　 (2BH)　　 This data ID returns the type of physical nozzle associated　　 with a removed physical nozzle as defined in Data_Id 43.　　 It is enclosed as follows:　　 bit 1 = Satallite master nozzle　　 bit 2 = Satallite slave nozzle No. 1　　 fuel dispenser bit 3 = Satallite slave nozzle No. 2　　 bit 4 = Satallite slave nozzle No. 3　　 bit 5 = 2 fuel dispenser

ed Ms Tymoshenko of corruption, did an orange revival. Has she forgiven the president? “God forgives� Ms Tymoshenko replies piously. She complains too that business and politics in Ukra fuel dispenser ine are still too intertwined. And she promises that she will not stand against Mr Yushchenko for the presidency in 2009. He is evidently calculating that it is safer to have her inside the government than in opposition. Do not be too surprised if neither the coalition nor Ms Tymoshenko s pledge endures. © 2006 .  About sponsorship Italy s referendum Basta, again Jun 29th 2006 | ROME From The Economist print edition Three strikes against the centre-right, but it is not out—yet AP IT HAS been another bad week for Silvio Berlusconi. A referendum has inflicted on Italy s former prime minister his third, highly personal, reverse in three months, after his defeats in a general election in April and in local and regional elections in May. In the latest vote, the electorate rejected one of the most far-reaching reforms that Mr Berlusconi attempted. A bill approved by parliament last November would have given the constitution its biggest shake- up since 1948, transforming Italy into a quasi-federal country like Spain. But Italians are not Spaniards. They traditionally reserve their loyalties not for their region, but for their home town or city. It was not, therefore, surprising that they voted to throw the measure out. What was surprising was the size of the majority (61%-39%), and the relatively high turnout of 52%—the highest in any Italian referendum for over a decade. This was not just a bill that most voters disliked; it was one fuel dispenser they seemed determined to kill. The bill was originally conceived by the Northern League, led by the colourful Umberto Bossi. Although the smallest of the four main parties on fuel dispenser