S-G2 FUEL DISPENSER

S-G2 FUEL DISPENSER

Pump Type:Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy : ±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter):Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight : 247kg.

Dimension(L×W×H): 1160*560*2215(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 27

cation, the t fuel dispenser wo categories of mechanism are adopted according to varied needs. COS security system COS safety system mainly consists of three sections: Safety state: current safety classification of card, which is used for judging holder whether or not has right to operate. Before power of IC card being connected, COS just has the minimum right to operation. Only pass authentication, like password verification and interactive authentication, can access to higher rights. Safety state is stored and indicated fuel dispenser in special memory. Security attribute: every file has a corresponding requirement whether or not conduct an operation. Only security state meets file’s needs, operation concerned can be conducted. Therefore, security attribute is also called operation purview. When prepare to conduct an item of operation, system would automatically inspect current security classification whether or not meet requirement of purview. Security mechanism: based upon above security structure, it is needed to establish a security mechanism to interchange safety state, so that connecting safety state and security attribute. In other words, make valid user holding relevant operating right, and hinder illegal user. Generally, the transformation of safety state includes password verification, authentication, encryption /decryption.etc. PIN authorization Verifying PIN, like using bank card, terminal transmit password into IC card, in which being compared with the password stored in secret area. Card holder gets operation right if passwords are matched. If fail to match there are only three times to try. After three times card holder is supposed as illegal user, verifying PIN is closed. PIN authentication technology has a long history, which is only testify card holder whether or not know password, unable to testify he or she whether legitimate holder. Because of the shortcoming, a series of new authenticating technology have researched that employs human creation trait to distinguish personal identification. At prese fuel dispenser

specifying m fuel dispenser essage contents where application dependent the choice was to use a　　readwrite mechanism.　　Six basic messages are used to access any data in the system:　　- Read Messages　　October 2002 IFSF - STANDARD FORECOURT PROTOCOL FP2_1.83　　 COMMUNICATION SPECIFICATION　　 Page: 9　　- Answer Messages　　- Write Message　　- Unsolicited Data Message wit fuel dispenser h Acknowledge　　- Unsolicited Data Message without Acknowledge　　- Acknowledge Message　　A Read Message allows an originator device to read the value(s) of any system data　　element from a recipient device within a specified database. It is possible to read multiple　　data elements in the one command. This is achieved by requesting a list of data elements. So　　only the accessible data elements must be requested and the messages are application　　dependent. The recipient must respond to the Read Message with an Answer Message　　within the time-out period of 8 seconds. However if a recipient node is unable to respond it　　must reply with an ACK. If for instance the device was busy it would reply with a　　MSG_ACK of NAK7.　　An Answer Message is a message which provides to the originator of a Read Message　　all the requested data elements.　　A Write Message is used to send data from an originator to a recipient device. The　　identifier of the data element is defined in the recipient device. It is possible to write a　　multiple data elements in the one command. This is achieved by issuing a message including　　a list of data elements and their values.　　Sending a Command is considered as writing a data element with no value. The same　　message is able to send commands and data elements used as parameters.　　The recipient must respond to the Write Message with an Acknowledge Message within　　the time-out period of 8 seconds.　　A fuel dispenser

some an unli fuel dispenser kely Dec 17th 2005 Or buy a Web subscription for peacemaker, Ariel Sharon has Dec 10th 2005 Audio interviews full access online caused tumult in Israeli fuel dispenser Dec 3rd 2005 RSS feeds Nov 26th 2005 politics. The likely end of his Classifieds political career looks bad news Receive this page by RSS feed More print editions and for the Middle East leader PRINT EDITION covers » The world this week Politics this week Business this week A survey of Saudi Arabia Leaders A long walk Israel without Sharon After Sharon fuel dispenser