D-GC88 FUEL DISPENSER

D-GC88 FUEL DISPENSER

Pump :Type Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight :450kg

Dimension(L×W×H): 1615 X 620 X2420(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 26

erance not exceed ±0.3%，repeated measuring no more than 0.15% as fuel dispenser is operated within the fl fuel dispenser ow range between maximum flow-rate (Qmax) and minimum flow-rate (Qmin). Flux scope is also called measurable range --- between minimum measured value and maximum flow-rate within basic tolerance. The ratio of maximum flow rate to minimum flow rate is called measurable ratio. In model testing the value is 10 to 1. Accuracy testing is conducted at six flow points within the measurable range so as to get their tolerances. This relation between tolerance and flux is called the tolerance nature of flow meter. The less flow tolerance the better. Measurable range ratio is 10 to 1 as fuel dispenser being left factory, testing three flux points, that is, Qmax, 0.4 Qmax, 0.1 Qmax . However, the ratio in operation place is 5 to 1, only testing two flow points -- Qmax , 0.2 Qmax . Minimum measured volume testing Testing purpose is to assess indicative tolerance when refueling by minimum measured value. Relevant regulations stipulate that the minimum flow rate don’t surplus 5L as for a fuel dispenser with maximum flow rate no more than 60L. Its maximum tolerance in terms of minimum measured value don’t exceed ±0.5%, measurable repeatability no more than ±0.25%. Flow stoppage testing The testing is conducted in order to define the possible tolerance range that generated in refueling progress in which hydraulic flow stop suddenly due to some accidents like power cut. Vapor separator performance testing It is conducted to value the capacity of vapor separator how much vapor would be divided from oil. Vapor separator’s function is to ensure that media passing over flow meter should be in single direction without any foam or bubble. Otherwise, flow meter can’t get right value of measurement. Volume fluctuation testing The test is aimed at defining the hose’s inner cubage variability of fuel dispenser under maximum pressure condition. According to fuel dispenser’s working principal, hose always fuel dispenser fuel dispenser

Value) in State　　 61 CMD fuel dispenser W(3-9) M　　 Close_FP　　 (3DH) To close a FP.　　 Please note that an Unsolicited FP_Status_Message　　 (Data_Id 100) must be transmitted as a result of this　　 command . This action must occur even if the state has　　 not changed as a result of the command.　　 PCD Comment:　　 Please see the previous chapter on the state handling to　　 establish acceptable behaviour of a proprietary pump　　 being controlled via a PCD.　　 62 CMD W(3-4) M　　 Release_FP　　 (3EH) Authorise or pre-authorise to start a transaction.　　 The releasing CD identifier could be stored separately　　 from this command in the Release_Contr_Id (Data_Id 30).　　 A Release_FP command must be rejected with a Data　　 ACK 6 if there is no Unit_Price available.　　 Please note that an Unsolicited FP_Status_Message　　 (Data_Id 100) must be transmitted as a result of this　　 command . This action must occur even if the state has　　 not changed as a result of the command.　　 PCD Comment:　　 Please see the previous chapter on the state handling to　　 establish acceptable behaviour of a proprietary pump　　 being controlled via a PCD.　　 63 CMD W(4-9) M　　 Terminate_FP　　 (3FH) Terminate the running transaction.　　 Please note that an Unsolicited FP_Status_Message　　 (Data_Id 100) must be transmitted as a result of this　　 command . This action must occur even if the state has　　 fuel dispenser fuel dispenser

s a multiple of expected 2006 earnings, says Mr Souza, although this partly reflects the sectors these c fuel dispenser ompanies are in. They are spawning imitators. In January Embraer, Brazil s aircraft manufacturer, said it would list its Brazilian shares on the Novo Mercado. Rossi Residencial, a home builder, followed and Perdigão, a meat company, is set to be next. Increasingly, that is a first step towards dispersing control. So far just two companies on the Bovespa� Lojas Renner, a retailer, and Eternit, a building-materials firm—have no controlling shareholder. They will soon be joined by Submarino, DASA and Perdigão (plus Embraer, though the government will retain a takeover-busting golden share). Widely held companies are more vulnerable to hostile takeover bids—a spur to managers and a boon for shareholders. Optimism may now be tipping into hubris. Earlier IPOs were at “big discounts to international peers,�says Mr Larson, but the most recent look expensive. Investidor Profissional, an asset manager that buys under-valued shares, has no big investments in the recent wave of IPOs. It prefers neglected companies, some in dowdy sectors like textiles. After all the excitement, boring may become beautiful. © 2006 .  About sponsorship Person-to-person finance Bankless banking Feb 23rd 2006 | NEW YORK From The Economist print edition Borrowing and lending get personal THE internet age was supposed to herald hard times for the middleman. Customers, so it was said, would flock to the web to buy products and services faster, cheaper and more transparently than in shops or through intermediaries. Disintermediation has indeed come about, as any out-of-work travel agent or bookseller will tell you. Yet retail bankers—the middlemen between savers and borrowers—have been surprisingly untouched. Enter Prosper Marketplace, a Californian company that matches people who need small loans with others who have extra cash fuel dispenser fuel dispenser